Motor Attachment Coupling tuner upgrade Select which Grip you want

Select which Grip you want to use with your turner and we will make sure you get the correct fittings needed for this Turner which will be a 3/4" PVC with Slip on Coupler Only

Rhinestone Bling Reader Video

NEW Triple Grip Combo + Pen Grip

This setup is for the Denos turner that uses 3/4 PVC pipe with a hole on the wand for their push button release arms

Holds 5 oz Disposable Cups that fit our Epoxy Mixer here

Motor Attachment Coupling tuner upgrade Select which Grip you wantThis is used to attach to the motor shaft on Turners. The motor shaft must be 7mm or smaller. If you don't have a Digital Caliper to measure the diameter of your motor shaft, a Mc Donald's Straw is exactly 7mm inside so if you slide the straw over the motor shaft and it is a snug fit then your motor has a 7mm shaft. Attaching these to motors is easy. Loosen the 2 black set screws with the provided allen wrench, slide it over the shaft of the motor and