ESP32-S3 Development Board with 2.8" IPS LCD Display (480 x 640) _RPI_USB_REMOTE Indicator PWR: Power indicator NET:

Indicator PWR: Power indicator NET: Network indicator Other Parameters Power Supply USB port or VBUS - GND pin: 5V power supply VIN - GND pin: 5V~26V wide-range voltage power supply BAT - GND pin: 3

or Grove I2C sensors (with this conversion cable) and device peripherals

Powered by the Raspberry Pi RP2350 microcontroller

Receiver type 33 tracking channels

It's chainable and can be cascaded with multiple LED rings

ESP32-S3 Development Board with 2.8" IPS LCD Display (480 x 640) _RPI_USB_REMOTE Indicator PWR: Power indicator NET:This board comes with an Xtensa 32 bit LX7 dual core processor that operates up to 240MHz and 16MB Flash, 8MB PSRAM and an SD card slot. It supports 2. 4GHz Wi Fi (802. 11 b g n) and Bluetooth 5 (LE) with an antenna, and you'll find UART, I2C and GPIO connections on the board with a USB C port for power. On the back of the board, you'll find a colourful 2. 8" IPS display with 65K colours and a 480 x 640 resolution. The capacitive touchscreen version