CT Race Worx Maverick X3 72" Race Tie Rods -Black Anodized Maverick X3 Turbo A 1/8" pilot gets drilled

A 1/8" pilot gets drilled first and then that hole gets opened up from 1/8" to roughly 1/4" or slightly larger hole

This helix angle is WAY less aggressive than the stock helix

Our clutch fan blade will perform better than any CVT blower from 5000 RPM and up where you need it most

The shims make up the space over the transmission input shaft to set how far the clutch halves are spread apart

FourWerx Carbon | 20+ POLARIS RZR PRO XP CARBON FIBER SHIFTER SURROUND

CT Race Worx Maverick X3 72" Race Tie Rods -Black Anodized Maverick X3 Turbo A 1/8" pilot gets drilledThese tie rods will never leave you stranded, they feature 1. 125" solid billet 7075 aluminum rod with wrench flats. We use only the best joints on the market which are JMX series FK 5 8 rod end. These joints use a fabric based teflon liner known as a PTFE liner. The inner joint housing is compressed to create a preload on the ball that will stay tight roughly 3 times longer than a standard injected teflon rod end, which is standard in the industry.