Straight Guide Post - 3.0 mm x 30 mm Bending Tool 035” Hex Driver is used

035” Hex Driver is used to tighten and loosen the Stylus Set Screw against one of the four flat sides of the Guide Post

0 mm implants

- CANTILEVERED RESTORATIONS WITH RIDGE AUGMENTATION

designed to fit over the 1/16" upper shaft of the 2-Piece Guide Post Lower Part

with a 3/16 inch to 5/16 inch diameter

Straight Guide Post - 3.0 mm x 30 mm Bending Tool 035” Hex Driver is usedThe Straight Guide Post is used to orient the Guide Sleeve to the axis of the hole which has been drilled into the cast. The Guide Sleeve is placed over the Guide Post while gel is applied to form the body of the Diagnostic Surgical Guide. Dimensions: OD 3. 0 mm x 30 mm L Pair with: Guide Sleeve With Cleat 3. 0 mm Short Guide Sleeve With Cleat 3. 0 mm Wide Guide Sleeve With Cleat 5. 3 mm Guide Sleeve Without Cleat 2. 0 mm x 8. 0 mm Guide Sleeve With