Short Guide Sleeve - With Cleat - 3.0 mm Oral Hygiene Brush Products The drill can be inserted

The drill can be inserted from the side at the lower end of the angle cut and therefore does not require the patient to open as wide

Guide Sleeve Inserts are pressed down into a Sleeve to obtain a press fit to prevent Inserts from spinning while drilling

01 mm Guide Sleeve With Cleat is used for anterior and posterior areas where access to the implant area is unlimited

It can be reversed and used to access drill depth

leaving the adjacent proximal surfaces very difficult to clean with a traditional brush

Short Guide Sleeve - With Cleat - 3.0 mm Oral Hygiene Brush Products The drill can be insertedThe 3. 0 mm Short Guide Sleeve With Cleat is used with Guides fabricated for patients with inadequate inter occlusal space. Sleeve is used to place over Straight Guide Post, which has been placed in the prosthetically planned 3 32 hole in the cast. Primotec metablue gel is added to capture the cleat, then cured to form the Guide. Dimensions: ID 3. 0 mm x OD 3. 7 mm x 5 mm L with cleat Pair with: Straight Guide Post 3. 0 mm x 30 mm