Guide Sleeve - Without Cleat - With Lip - 3.9 mm x 5 mm Drills Handheld Drill Handle

Handheld Drill Handle

Bending Plate Protractor

035” Hex Driver is used to tighten and loosen the Stylus Set Screw against one of the four flat sides of the Guide Post

9 mm Depth Stop Drill Set in stereolithographic printed guides

Place the Fabrication Insert inside the Guide Sleeve over the corresponding Guide Post and then apply gel

Guide Sleeve - Without Cleat - With Lip - 3.9 mm x 5 mm Drills Handheld Drill HandleThe 3. 9 mm Guide Sleeve Without Cleat With Lip is for use with printed guides only. Sleeves are designed with a lip which secures the stereolithographic printed Guide Sleeve so it will not slip through the printed guide hole. Dimensions: ID 3. 9 mm x OD 5 mm x 5. 07 mm L OD 6. 2 mm lip x . 05 mm lip thickness Pair with: 3. 9 mm Depth Stop Drill Set