Shim kit for centralising caliper on disc (1.9mm per side) - for 7/16" fixing bolt Model_3000 Mk3 (BJ8) Technical specification Fitting guidance MEASUREMENTS

Technical specification Fitting guidance MEASUREMENTS

Technical specification Fitting guidance Number of leaves OEM Number Vehicle notes Quantity required for vehicle Orientation Year Chassis end bush Shackle end bush Eye to Eye length (approx) Camber (Floor to centre of arc - approx) Weight BCC part number 2 - - 1 Longitudinal - - - - - Approx 40 - 50 kg BCC-PLEF005/NS

The availability of good quality rubber bushes is becoming an increasing problem

but worst case delivery should be within a week

Technical specification Fitting guidance Number of leaves OEM Number Vehicle notes Quantity required for vehicle Orientation Year Chassis end bush Shackle end bush Eye to Eye length (approx) Camber (Floor to centre of arc - approx) Weight BCC part number 10 552306 - 2 Longitudinal 1966 on - - - - Approx 40 - 50 kg BCC-MROR3099

Shim kit for centralising caliper on disc (1.9mm per side) - for 7/16" fixing bolt Model_3000 Mk3 (BJ8) Technical specification Fitting guidance MEASUREMENTSThis Stainless Steel shim kit allows includes the following shim thicknesses: 4 x 0. 9mm 8 x 0. 5mm This allows up to 1. 9mm of adjustment on each caliper to centralise on the disc. For use on vehicles using a 7 16" fixing bolt or for our Knockhill, Oulton, Pembrey, or Silverstone caliper kits.