CMT 226.048.10 Metal & Steel Dry Cut Saw Blade 10" x 5/8" T48 FWF Drop-In (DIAB) Internally Threaded Anchor helping to keep chips and

helping to keep chips and coolant away from the Y-axis ways and maintaining smoother operation over time

What drive type do these bits use

WAX STICK FOR LUBRICATION NOT RECOMMENDED

ATB 15-degree tooth geometry and negative hook angle deliver fine

The Simpson Strong-Tie HGUS3

CMT 226.048.10 Metal & Steel Dry Cut Saw Blade 10" x 5/8" T48 FWF Drop-In (DIAB) Internally Threaded Anchor helping to keep chips andThe CMT 10 inch Metal and Steel Dry Cut Saw Blade cuts channels, studs, angles, pipes, rods, and conduit cleanly without coolant. Produces cuts that are cool to the touch with no burrs or heat affected zones. SPECIFICATIONS Diameter 10" (254mm) Number of Teeth 48 Bore Diameter 1" (also fits 5 8") Tooth Grind Type Flat with Alternate Chamfer (FWF) 8 degrees Kerf Thickness 0. 087" Plate Thickness 0. 071" Hook Angle 0 degrees Maximum RPM 3,000 Coating