Press Fit Guide Sleeve Insert - 2.0 mm for 3.0 mm Guide Sleeve Guide Sleeves - 2 GRAFTS & REPLACEMENT

- 2 GRAFTS & REPLACEMENT OF LOWER INCISOR

Guide Sleeve Inserts are pressed down into a Sleeve to obtain a press fit to prevent Inserts from spinning while drilling

The drill can be inserted from the side at the lower end of the angle cut and therefore does not require the patient to open as wide

This tool is a one-size-fits-all

003 end rounded nylon filament

Press Fit Guide Sleeve Insert - 2.0 mm for 3.0 mm Guide Sleeve Guide Sleeves - 2 GRAFTS & REPLACEMENTThe 2. 0 mm Press Fit Guide Sleeve Insert, in conjunction with various drill sizes, is used with many implant systems. It is designed to press fit into the Guide Sleeve With Cleat and is removable with the Insert Removal Tool. Dimensions: ID 2. 0 mm x 9. 7 mm L Instructions for use: The surgeon (or assistant) will need to use the Insert Removal Tool to release the Insert before placing the next larger size in a multi drill sequence. Inserts release