Guide Sleeve - Without Cleat - With Lip - 3.1 mm x 5 mm Drills 9 mm Depth Stop Drill

9 mm Depth Stop Drill Set in stereolithographic printed guides

85 mm Flattening Drill

035” Hex Driver is used to tighten and loosen the Stylus Set Screw against one of the four flat sides of the Guide Post

Guide Sleeve - With Cleat - With Lip - 4

0 mm for 4

Guide Sleeve - Without Cleat - With Lip - 3.1 mm x 5 mm Drills 9 mm Depth Stop DrillThe 3. 1 mm Guide Sleeve Without Cleat With Lip is designed with a lip which secures the stereolithographic printed Guide Sleeve so it will not slip through the printed guide hole. For use with printed guides only. Dimensions: ID 3. 06 mm at apex top x OD 3. 75 mm x 5. 04 mm L OD 4. 5 mm lip x . 05 mm lip thickness Pair with: 3. 0 mm Lindemann Depth Stop Drill Set