Amplified GPS Antenna Splitter | 8 Outputs, 1 Input, SMA Connectors 8083-9B INSTALL KIT FOR SAE5-35

INSTALL KIT FOR SAE5-35

providing superior strength to firmly hold the Gen 3 antenna on any flat surface

This ADS autopilot installation hardware kit (EDMO# 9645111080) facilitates the installation of the Garmin GFC500 into the Cessna 210 D/E/F aircraft per drawing number 190-02291-80 in the installation manual

reduced power consumption

This sieve reflector nozzle (EDMO# 110038725) is used for heating and distributing air around heat-shrink tubing

Amplified GPS Antenna Splitter | 8 Outputs, 1 Input, SMA Connectors 8083-9B INSTALL KIT FOR SAE5-35The ALDCBS1X8 GPS amplified splitter has one input and eight outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2 J8)