MiniPro Voltage/Current Sensor Off Road Stand Unit must return to below

Unit must return to below 40° Celsius before starting a new cycle

This product is not compatible with 1/10 540 sized motors

recommend to use RX24 100W resistors with fans and heatsinks to cool them down):

This is a platform that press fits on the top of the Server power supply if you are using the Battery Wizard Stand

This is a device to measure the strength of your 540 motors spec rotors

MiniPro Voltage/Current Sensor Off Road Stand Unit must return to belowThis is a redesign of the MiniPro 200A Current Voltage sensor. This sensor runs off a separate power supply than the power source you are using for the MiniPro. Operates off of 7. 5 15VDC, you will need to supply your own power leads. Solder the positive lead to the VIN+ and the ground to the VIN . Run the sensor in series with your power source for your motor to get the current and voltage information. Calibration of the sensor is done in the MiniPro