5.3 mm Fabrication Insert (FABIN) Medical Office Brushes 4 mm Depth Stop Drill

4 mm Depth Stop Drill Manual

5 mm Guide Sleeve

The softer nylon stimulates tissue

It is recommended (not always necessary) to use the Flattening Drill prior to the Pilot Drill if the crest is sharp or slanted and start the dental implant osteotomy site preparation with the Pilot Drill

0 mm offset and a dot at the end of the platform for easy orientation identification

5.3 mm Fabrication Insert (FABIN) Medical Office Brushes 4 mm Depth Stop DrillThe 5. 3 mm Fabrication Insert (FABIN) is required to keep acrylic gel from entering inside Guide Sleeve Inserts during the gel and curing stage. Place the Fabrication Insert inside the Guide Sleeve over the corresponding Guide Post and then apply gel. Dimensions: ID 3. 0 mm Pair with: Wide Guide Sleeve With Cleat 5. 3 mm Serial Guide Sleeve Insert 2. 6 mm for 5. 3 mm Guide Sleeve Serial Guide Sleeve Insert 3. 0 mm for 5. 3 mm Guide Sleeve Serial