MerCruiser 17' 8-Pin Wire Wiring Harness Dash to Motor Gauges 5.7L 4.3L 3.0L Timing Cover This item may work on

This item may work on these other Years and HP please do your research or ask for help

the bushings the shaft and the impeller

CC17214 from series CC172XX (where XX is cable length in Feet)

94981A2 (I want to say this usually had 2 indents on the face of the casting vs 1 of it but dimensionally I want to say it's the same)

((HI PERFORMANCE TRANSOM)

MerCruiser 17' 8-Pin Wire Wiring Harness Dash to Motor Gauges 5.7L 4.3L 3.0L Timing Cover This item may work onItem Details Measures around 17' 17FT 17 Feet 8 Pins (2 Big pins 6 Small pins) 8 Wires (7 Going into the Dash side plug) 8th wire for trim sender Some of these sometimes had an additional large "rubber pin" and others did not. It is not necessary and was a place holder for older MerCruiser wiring harnesses that featured an ammeter. They stopped using that wire sometime in the 1970's, but still molded it blankly into the engine wire harnesses So if you